| Model |
Function / Use |
Application |
| 457p |
Screen
and Flexo printing |
Unlike
any other densitometers, this unit gives not just the amount of pigment,
but how to adjust it, which makes it the only real densitometer for screen
and flexo. |
| 257p |
Screen
and Flexo printing |
Similar
to model 457p, without the dot function and at a lower price. |
| 120
u/v |
Dry
Film Setting use, both standard and OYO types. |
Designed
to read the effective density in the U/V range, where both density and
dot size readings using a normal densitometer would give incorrect information
about the film performance. |
| 630 |
Conventional
high-end use. |
Probably
the most accurate unit in the world. This unit is able to read densitites
at a higher level than any other unit. Also, it is able to measure in %
terms in steps of 0.1% = (0.001) density, where most units are "10 times
less accurate at 0.01" |
| 330 |
Flexo
(Packaging, etc.) |
The
only unit available that can measure the dot area on a processed flexo
plate. Being almost impossible to set up a direct-to-plate system without
this unit, in conventional matters it is allied with the OLEC type exposure
system. This unit can prove to be an exceptional tool for both increases
in quality and production. |
| 115 |
Direct-to-Plate
Litho |
This
unit is designed for use with the Silvermaster, Supermaster, ECRM and ITEK
type plates where the surface of the plate is black. It gives all measurements
required to calibrate this type of product on an imagesetter. |
| 115p |
Direct-to-Plate
Litho |
This
unit is designed for use with Aluminum type plates, both conventional and
direct-to-plate. The unit gives all measurements required to calibrate
these types pof product. For conventional plates, the use the Viptronic
plate wedge is recommended. It has the functional ability to change exposure
values displayed by this densitometer. |
| 19
(Gloss) |
Packaging,
all processes |
Another
totally new tool from Viptronic, based on the FORGA scale for gloss in
the printing industry. This unit is able to give the same Gloss (shine)
number irrespective of the color of the ink base. Already with a DIN standard
(No. 1653) in Europe, it is in line to have a USA ISO standard in early
1998. |
| Vipscan
2000 |
Packaging,
all processes |
This
unique scanning densitometer gas to be seen to be believed, with the ability
to measure in increments of 6 points per mm. The ability to measure inside
the work is now possible with starting accuracy and speed. This is not
a low cost unit to buy, but is without a doubt the only init ti run high
quality QC print control in the packaging and quality print market. Accurate
to +/- 0.001 |
| Vipstat
QC01 |
Packaging
and Quality printing. All processes, especially screen special order and
other 4-color work. |
This
software is designed to mimic the above densitometer for quality control,
where the cost of the above unit is more than work demands. |
| Vipsplit
QC02 |
For
Repro use |
This
unique software product is used with the Vip-pen or the Scan-dens pen to
give a CYMK split of a special color. Available for Mac and PC. |
| Reprocal
RC01 |
For
Repro use |
This
product is a combination of a color reflection transmission unit with the
functions of Vipsplit but with added software to provide image manipulation
and powerful LUT (Look-Up Tables) to allow the use of the TSS image management
system. This system is designed for those who would like image management
without the high cost of the spectrophotometer ICC profiling system. |
| DTP-CAL
DT01 |
For
DeskTop Publishing |
This
is a total package of densitometers and software that covers all aspects
of DTP measurements, from copy to film and proof. |
| DTP-CAL
DT02 |
For
DeskTop Publishing |
As
above, but also adding full image manipulation software. As a benchmark
for general use on a 36 MB PowerMac, this software is able to save and
recall an A2 page in less than 5 seconds. |
| 917p |
Newpaper
and allied industries |
This
is a unique unit designed especially for use in the newspaper industry.
This product has been extremely successful in the UK, and is installed
and used by most newpapers both regionally and nationally. |
| Vipstat
QC03 |
Software
product for Newspapers |
To
be used with the 917p, this software gives invaluable information about
the print. |
| 400/900/1000
series |
Proofing |
A
range of color densitometers for all applications of proofing. |
| Vip-pen
450 |
Digital
Printing (also Digital Proofing) |
A
color reflection unit, specially designed with Digital Print in mind. |
| DG
Copier |
Copier
calibration |
Designed
exactly for the task. |
| DG
Printer |
Printer
Calibrator |
Designed
like the above, but with special filtration for printers. |
